Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 1099

Serial Intreface KIT-K3/ Copy
Control Interface KIT-A1
Points to Note at Installation
• Refer to "Table of Options Combination" when installing
this equipment before operation.'
Table of Options Combination
Utility Voice
Tray Opera- Opera-
tion
Kit
Serial yes yes
Inter-
face Kit
Copy yes yes
Control
Inter-
face Kit
yes: Available no: Unavailable
CAUTION:
Marked portion
When tightening the screws, do not tighten them too
tightly. Otherwise, there is a risk of damage and
deformation of screw holes.
Voice Serial Copy Copy
Inter- Con- Card
tion face trol In- Read-
Kit Kit terface
Kit
yes - no
yes no -
Essential Items to Be
Performed Before Installation
• Turn OFF the main power of the host machine, and
disconnect the power plug from the outlet.
WARNING:
• If performing work without disconnecting the
power plug of the host machine, it may cause
electrical shock.
• If disconnecting the power plug without
turning OFF the main power, it may cause
damage of the machine.
er
• When turning OFF the main power, follow the below
procedure.
no
1. Turn OFF the main power switch of the host
machine.
2. The display in the Control Panel and the lamp of the
no
main power are turned off.
Points to Note when turning
ON/OFF the main power
The following message is displayed.
1. When a message prompting to turn OFF and then ON
the main power appears, turn OFF and then ON the main
power switch.
2. If a message prompting the user to update the version
appears, press [Update] to automatically update the
version of this equipment.
If [Skip] is selected, a message prompting the user to
update the version will appear every time the host
machine is started. In the service mode ( Lv.2 ) shown
below, it is possible to set not to display the message.
COPIER > OPTION > FNC-SW > VER-CHNG
Installation Outline Drawing
1077
9. Installation