Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 1130

Media Adjustment kit-A1
Points to Note when Installing
• Use paper whose weight is 60 to 300 g/m2 at pickup from
the Multi-purpose Tray.
• Do not close the Multi-purpose Tray Pickup Tray
Assembly while the Media Adjustment Kit is installed.
• When using the Media Adjustment Kit, do not stack
multiple sheets of paper.
• The pictures and illustrations used may be different from
the product in front of you, but the procedure is the same.
Installation Outline Drawing
Checking the Contents
[1] Media Adjustment
kit X 1
<Others>
• Including guides
[2] Spring （ Black） X 3
Essential Items to Be
Performed Before Installation
• Turn OFF the main power of the host machine, and
disconnect the power plug from the outlet.
WARNING:
• If performing work without disconnecting the
power plug of the host machine, it may cause
electrical shock.
• If disconnecting the power plug without
turning OFF the main power, it may cause
damage of the machine.
• When turning OFF the main power, follow the below
procedure.
1. Turn OFF the main power switch of the host
machine.
2. The display in the Control Panel and the lamp of the
main power are turned off.
Points to Note when turning
ON/OFF the main power
The following message is displayed.
1. When a message prompting to turn OFF and then ON
the main power appears, turn OFF and then ON the main
power switch.
2. If a message prompting the user to update the version
appears, press [Update] to automatically update the
version of this equipment.
If [Skip] is selected, a message prompting the user to
update the version will appear every time the host
machine is started. In the service mode ( Lv.2 ) shown
below, it is possible to set not to display the message.
COPIER > OPTION > FNC-SW > VER-CHNG
Installation Procedure
1. Open the Right Door.
1108
9. Installation