Plugging In The Control Module; Turning On The Heat Generator - Wolf COB-2 Operation Instructions Manual

Commissioning
6.3

Plugging in the control module

Fig. 6.1 Plugging in the control module
► Place the control module in the slot above the WOLF logo.
► Fit casing (Fig. 5.3 Attaching the
6.4

Turning on the heat generator

Fig. 6.2 ON/OFF switch
► Press the ON/OFF switch.
✔ Commissioning assistant is launched.
3066501_201910
casing).
WOLF GmbH | 49