Installation
5.10.2
Terminal box delivered condition
In the delivered condition, the terminal box is fitted to the back panel of the heat generator.
The control and safety devices are fully wired and tested.
Fig. 5.18
COB-2 terminal box delivery condition
Lines for connections to stratification cylinder
q
and condensate pump
Terminal box at rear (factory default)
w
5.10.3
Removing the terminal box
If required, the terminal box can be mounted on the wall to the left of the heat generator, or above it.
q
Fig. 5.19
Installation positions for terminal box installed on the wall
Terminal box with input at top
q
Terminal box with input to right
w
3066501_201910
q
w
Opening for heat generator cable feed through
e
Lines for heat generator connections
r
w
Terminal box with input to left
e
e
r
e
WOLF GmbH | 41