Show Commands - Fujitsu Siemens Computers PRIMESTATION Series Manual

RCA commands
Server Set
You can use the Server Set command to change the RCA address parameters.
These changes only become effective the next time the RCA is rebooted.
Access rights:
SCON
Syntax:
SERVER SET IP=<
subnet_mask
MASK=<
[GATEWAY=<gateway_ip_address>]
Parameters:
ip_address
IP address of the RCA
subnet_mask
Subnet mask for the network in which the RCA is available.
gateway_ip_address
IP address of the gateway in the RCA subnet if a gateway is set
up.
5.9.2.4

Show commands

Show Port
You can use the Show Port command to display configuration and status infor-
mation for the RCA ports.
Access rights:
SMON
Syntax:
SHOW PORT [<
Parameters:
port_number
Port number (1–16 with RCA4 (16 ports), 1–8 with RCA4-8).
ALL
Shows the informationen for all ports
Default: Own port, if the CLI was activated from an existing console
connection.
86
ip_address
>
>
port_number
>|ALL]
PRIMESTATION as LAN Console
U41270-J-Z916-2-76