Access Rights - Fujitsu Siemens Computers PRIMESTATION Series Manual

RCA commands
Furthermore, the RCA command interface can also be accessed within an
opened console connection, i. e. from the console window, via the CLI access
sequence. This is the sequence [CTRL] and "]" as described in the section
"Configuring the RCA". This type of access is particularly essential for sending
a BREAK and for displaying the history of the characters received.
5.9.1

Access rights

Certain user-dependent rights are necessary in order to execute RCA
commands, in other words to configure and administer the RCA. The typical
Admin user has access rights for all RCA commands.
Each individual user can be assigned several of the rights listed below - see the
section "User commands":
SCON
Authorized to configure the RCA
SMON
Authorized to display RCA status information
USER
Authorized to create and delete users as well as to change user data
BREAK
Authorized to send a BREAK signal
P
Authorized to set up console connections
The necessary access rights are also specified in the RCA commands
described below.
I
If the identity check for accessing the RCA has been disabled - see the
"Server Security" command, user-independent console connections can
be set up via the RCA4. Access is only possible with such console
connections to those RCA commands that do not require rights.
76
PRIMESTATION as LAN Console
U41270-J-Z916-2-76