Serial Port For Connecting The Console - Fujitsu Siemens Computers PRIMESTATION Series Manual

As lan console or system management console (smc)

Table of Contents

PRIMESTATION as LAN Console

5.2.1.2

Serial port for connecting the console

The serial ports of the RCA4 have 8-pin RJ 45 connectors.

Transmission rate: 50 Baud to 115.2 Kbit/s

Once you have positioned the RCA in a suitable location or installed it in the

rack,

Ê connect the RCA to the LAN

Ê connect the ports to the server system using the appropriate cable, as

shown in the next diagrams.

Cables must not prevent the rear door from closing

Always make sure when connecting cables that the rear door of the

system cabinet can be closed again effortlessly.

Ê Secure the connector by tightening its screws.

Connecting to the RM server

Figure 14: Connecting the RCA to the backplane of the device (in this case an RM 600 E45

model)

Ê Connect the cable to the pins which are at the top of the HIOS or EHIOS

basic controller (9-pin).

Ê Insert the connector into the port as shown.

U41270-J-Z916-2-76

RCA

Table of Contents