Operating The Scs - Fujitsu Siemens Computers PRIMESTATION Series Manual

System Console Software (SCS)
I
If a reinstallation of SCS 2.0 should be necessary, also the eri LAN ports
have to be reconfigurated.
I
Not all of the SCS packages listed in the Release Notes are requested in
terms of hardware and therefore are not installed on the
PRIMESTATION.
If patches are to be installed in accordance with the Release Notes, only
the hardware-independent patches, i.e. those under the path .../patch/scs
on the SCS CD, need be considered for the PRIMESTATION.
6.3.2

Operating the SCS

The System Console Software User's Guide describes how to use the System
Console Software (compare section "PRIMEPOWER publications" in the
appendix "Related publications"). This manual is also available as an online
document on the SMC.
Notes on the chapter "Console Window" in the SCS User's Guide
The console windows of partitions on connected PRIMEPOWER enterprise
servers are accessed from the SMC via a host browser (RC2000). Shortcut keys
can be used to display function menus within an opened console window.
It is especially possible here to send a BREAK signal to the respective partition.
To display the menues mentioned above the [Ctrl] or the [Strg] key is to be
pressed in combination with a mouse button. With the PRIMESTATION
keyboard only the [Ctrl] and [Strg] keys on the right-hand side of the keyboard
may be used in this way.
102
PRIMESTATION as SMC
U41270-J-Z916-2-76