System Console Software (Scs) - Fujitsu Siemens Computers PRIMESTATION Series Manual

PRIMESTATION as SMC
6.3

System Console Software (SCS)

The System Console Software (SCS) must be installed in order to be able to
use the PRIMESTATION as an SMC.
6.3.1 Installing SCS
The System Console Software (SCS) is installed on the SMC in accordance
with the "System Console Software Installation Guide" and taking account of the
"System Console Software Release Notes". These guides are included in the
scope of delivery of the current SCS and are stored on the SCS CD in pdf
format. Acrobat Reader must be installed first in order to be able to read the
files.
The System Console Software for the PRIMESTATION for the first time is
available with version 1.6.
The original Fujitsu documentation included, particularly the System Console
Software Release Notes, does not take account however of the underlying
PRIMESTATION hardware. This relates to the allocation of PCI and Ethernet
connections and disk partitioning. The information provided in this context in this
manual (see table 19 above and table 7 on page 23) is binding.
SCS from version 2.0 supports the use of onboard eri LAN ports (eri0 and eri1)
for the System Control LAN.
Directly subsequent to the installation of SCS 2.0, i. e. before a reboot of the
PRIMESTATION is done, these eri LAN ports for the System Control LAN of the
SMC have to be configurated.
The command
/opt/FJSVcsl/bin/cmdifchange eri 0
creates the hardware specific configuration entry
model SUNW,UltraAX-e2 eri 0
in the file /opt/FJSVcsl/lib/model.dat.
V
Further use of old FE Controllers
If a device with 2 FE controllers is upgraded to SCS 2.0, the 2 controllers
can be further used (see also table 19). In this case the command
cmdifchange above must not be called.
U41270-J-Z916-2-76
System Console Software (SCS)
101