Configuration - Fujitsu Siemens Computers PRIMESTATION Series Manual

Configuration

A dialog box then appears and you proceed as described there (language
setting, root password, etc.).
– Starting at desktop level
You will find the WSA application on the desktop in the Workspace Menu under
Applications -> Application Manager -> System_Admin -> WebSysAdmin.
5.4 Configuration
In order to be able to configure the system, the LAN Console must have been
connected to the RCA via the LAN and the RCA must have been connected to
one or more RM or PRIMEPOWER (MR) servers via a serial port (see figure 13
on page 28).
I
The RCA is connected in the private LAN for security reasons.
From the LAN Console, the system administrator manages both the RCA and
the console connections of the attached RM and PRIMEPOWER (MR) servers.
I
Distinguishing between RCA3 and RCA4
This manual deals primarily with the configuration of the current RCA4
described in the section "Remote Communication Adapter". If a
distinction is necessary between the current RCA and previous versions,
the current RCA is referred to as RCA4 and the previous versions as
RCA3.
I
Distinguishing between RCA4 und RCA4-8
This description of the configuration of the RCA always refers to the
model with 16 ports. If you are in possession of an RCA4-8 with 8 ports
but you configure ports 9-16, you get an error message not until you call
xscon.
All RCA (1-4) can be operated from the SPARC/Solaris LAN Console in mixed
mode.
40
PRIMESTATION as LAN Console
U41270-J-Z916-2-76