Generating The Software - Fujitsu Siemens Computers PRIMESTATION Series Manual

Teleservice on PRIMESTATION
Software installation
The Teleservice package is preinstalled at the factory.
To reinstall the package, first install the Teleservice (SMAWtssv) package from
the FSC Control CD with the pkgadd command.
7.2

Generating the software

The screens depicted in this section show a sample configuration. Since some
screens depend on the parameters that have been input, the generation
process may involve some different screen texts or different screens.
Logging in
Ê Log in under a user ID with root privileges and issue the teleadm command
from the shell. You will see the following start screen:
The Teleservice SCL is subject to optional contractual agreements. You
should contact your sales partner if you would like to use it. The relevant
service must first be set up so that the modem can be installed.
Ê From the first menu in the first window choose option d "Install Teleservice
channel" and in the next menu, option a "Install/Modify service at Teleservice
channel". The physical properties are entered in the third window.
U41270-J-Z916-2-76
Generating the software
105