Upgrading The Primestation To An Smc - Fujitsu Siemens Computers PRIMESTATION Series Manual

PRIMESTATION as SMC
6.2

Upgrading the PRIMESTATION to an SMC

A PRIMESTATION as an SMC is additionally equipped with the following
hardware components.
– with SCS 1.7 and lower the PRIMESTATION is upgraded with:
DDS4 SCSI-DAT drive
SCSI/Fast Ethernet combo controller
2 Fast Ethernet controllers (not with SCS 2.0)
128 or 256 Mbyte RAM
SCSI cable, SCSI adapter, SCSI terminator
Table 17: Upgrading to SMC with SCS 1.7 and less
I
If an upgrade like this is to take place at the customer's site it has to
be performed by our Service organization.
– from SCS 2.0 the SMC can be ordered as basic configuration that -
compared to the PRIMESTATION - comprises the following additional
hardware:
DDS4 SCSI-DAT drive
SCSI/Fast Ethernet combo controller
SCSI cable, SCSI adapter, SCSI terminator
overall 512 Mbyte RAM (not additional)
Table 18: Upgrading to SMC with SCS 2.0 and higher
I
SCS 2.0 for the first time supports the onboard eri LAN ports. There-
fore the two additional FE controllers are no more necessary. If a
device with two controllers is upgraded to SCS version 2.0 or higher,
the two controllers can be further used, if that is wanted (compare
"Installing SCS" on page 101).
U41270-J-Z916-2-76
Upgrading the PRIMESTATION to an SMC
97