Connecting Devices With A Serial Or Usb Interface - Fujitsu Siemens Computers PRIMESTATION Series Manual

PRIMESTATION
4.4.3

Connecting devices with a serial or USB interface

Ê Connect the data cable to the external device.
Ê Connect the data cable of the external device to the corresponding interface
on the PRIMESTATION.
I
Most devices that you connect to the serial or Universal Serial Bus (USB)
interface require special drivers. Many drivers are already included in
your operating system. If the required driver is not on the hard disk, you
have to install it from the diskette or CD-ROM, which was supplied with
the device or with the application program.
4.4.4 Connecting the monitor
The monitor is not part of the scope of delivery of the PRIMESTATION and has
to be ordered separately.
Ê Prepare the monitor as described in the Operating Manual for the monitor.
Ê Insert the data cable for the monitor into the monitor port of the PRIMES-
TATION (video connector J5 as shown in figure 5).
Figure 7: Monitor connection
Ê Connect the power cable for the monitor, depending on the plug, to the
monitor socket on the system unit (1) or to the grounded power outlet (2).
U41270-J-Z916-2-76
Overview of connections
1
2
17