Bootpconf - Fujitsu Siemens Computers PRIMESTATION Series Manual

Remote Boot und Installation
5.4.3.2

bootpconf

Syntax:
bootpconf [-u]
The bootpconf tool is used to start or stop the DHCP service in BOOTP mode on
the LAN Console. If you input the command without parameters the DHCP
service is started in BOOTP mode.
-u
(unconfigure). If the DHCP service has been started with bootpconf, it is
now stopped.
V
Configuration files being deleted
In addition, all configuration files under /var/dhcp are deleted, the links to
/etc/rc[0-3,S]/[KS]34dhcp are deleted, the dhcpd options in /etc/init.d/dhcp
are reset and the /etc/default/dhcp configuration file is deleted.
Procedure in the system
1. Stop the DHCP service if it is running.
2. Create the /etc/default/dhcp file.
3. Enter the dhcpd options in /etc/init.d/dhcp (-o 10 -b manual).
4. Create the DHCP service configuration table /var/dhcp/dhcptab with
dhtadm -C.
5. Create the local DHCP network table /var/dhcp/xxx_xxx_xxx_xxx with
pntadm -C, empty at present.
6. Create or update the local LAN macro in /var/dhcp/dhcptab with
dhtadm -A -m xxx.xxx.xxx.xxx -d ":Subnet=${SUBNET_IP}:Router=
${ROUTER_IP}:"
7. Define links from /etc/init.d/dhcp to /etc/rc[0-3,S]/[KS]34dhcp.
8. Start the DHCP service in BOOTP mode.
5.4.3.3 add_RM_client
Format 1:
add_RM_client -i
-s SUBNETMASK -m MACRO -b BOOT_FILE CLIENT_NAME
62
IP_ADDR -e ETHER_ADDR [-g GATEWAY_ADDR]
PRIMESTATION as LAN Console
U41270-J-Z916-2-76