Operating The Lan Console - Fujitsu Siemens Computers PRIMESTATION Series Manual

Operating the LAN Console

PRIMESTATION as LAN Console
5.5 Operating the LAN Console
The LAN Console can represent the consoles on RM or PRIMEPOWER (MR)
servers. All commands are available on each LAN Console, including the
following console diagnostic tools: IKDB (Internal Kernel Debugger), BDM
(Board Debug Monitor) and OBP Monitor. RM or PRIMEPOWER (MR) servers
can also be rebooted from the LAN Console.
xscon call
Access to the RM and PRIMEPOWER (MR) servers is provided by xscon
(SMAWxsco package) and the necessary connection is selected and established
internally via rtty (SMAWrtty package). Connection setup is supported for all
RCA types (RCA4 and RCA3). To establish this connection, both xscon and rtty
require data, which is defined when the LAN Console is configured.
Figure 23: xscon mask
66
U41270-J-Z916-2-76