Installing Telecall - Fujitsu Siemens Computers PRIMESTATION Series Manual

Teleservice on PRIMESTATION
Event management is an instrument that defines events on the basis of error
messages and the frequency with which they occur and initiates reactions
according to these events.
An event occurs when the number of times that an error is reported within a
certain period reaches the defined threshold value.
The events and reactions are described in event and reaction definitions. You
can display and edit these definitions using the event management functions
under WebSysadm ->Diagnostics.
The events are stored under $LOGPATH/filters and the reactions are stored
under $LOGPATH/reactions. For more information about error management with
TeleCall, refer to the manual "Error Diagnostics and Troubleshooting".
The following software packages allow you to configure a TeleCall cluster for
computers that can be reached from the PRIMESTATION:
– SItelx (Domain Teleservice Distribution) for Reliant UNIX
– SMAWtelx (Domain Teleservice Distribution) for Solaris
7.4.1

Installing Telecall

7.4.1.1 Preparations
Ê Draw up a list of the node names of all machines that are to belong to the
TeleCall cluster.
Ê Check whether all machines in the above-mentioned list can be accessed
from the PRIMESTATION, for example using
NodeName
ping <
7.4.1.2 Software installation on the PRIMESTATION
Ê Install the Logging 3.0 software package (SMAWlog3, SMAWlog3M,
SMAWdaps), component of FCS Basic Extensions, from the current
Supplement CD (CD-SUP-SPARC). The software package is then installed
automatically.
Ê Install the SMAWtelx (Teleservice Cluster Distribution) software package,
component of Domain Admin, from the current FSC Control CD (CD-SYS-
MGMT-SPARC).
U41270-J-Z916-2-76
>
TeleCall
113