New Rca Ports - Fujitsu Siemens Computers PRIMESTATION Series Manual

As lan console or system management console (smc)

Table of Contents

Configuration

Syntax:

port 1 set cli=off

The next query as to whether the RCA should be rebooted should be answered

with 'y'. The administration window is closed and the RCA reboots. This

concludes the configuration of the RCA.

If the RCA is not operated in a private network - as stipulated for

security reasons - and if it is to be accessible via a gateway, the

gateway address should be entered in the RCA as described in the

command "Server Set" on page 86.

If the RCA was initialized - see "Init" on page 35 - all parameters listed

here must be reset.

5.4.2.4

New RCA ports

Configuration entry

for <port number RCA>

Configuration entry

correct ?

Another

configuration entry?

Figure 22: New RCA ports

Further configuration entries for an existing LAN Console are created by means

of the mklancon script - as shown in the figure "Configuring the LAN console and

the RCA" on page 42 and "mklancon - Create LAN Console configuration

entries" on page 45.

If the newly created configuration entries relate to RM system connections, the

speed should be set to 19200 baud for the relevant port in the RCA4.

New ports on the LAN console

mklancon

showlancon

yes

PRIMESTATION as LAN Console

Delete

configuration entry

rmlancon

U41270-J-Z916-2-76

Table of Contents