Unpacking And Checking The Delivery Unit - Fujitsu Siemens Computers PRIMESTATION Series Manual

Startup and operation
4.3.2

Unpacking and checking the delivery unit

You should keep the original device packaging in case the device has to be
transported.
Ê Unpack all the parts.
Ê Check the package contents for visible transport damage.
Ê Check that the delivery matches the details on the delivery note.
If you discover transport damage or inconsistencies between the packaging unit
and the delivery note, inform your local sales office immediately.
4.3.3 Installing the PRIMESTATION
V
Warning
Pay attention to the safety notes when installing the PRIMESTATION.
The PRIMESTATION should only be installed in a specially designated
position. This can be checked from the diagrams on the next pages.
The device should not be subjected to any extreme environmental condi-
tions (see section "Environmental conditions" on page 12). It should be
protected from dust, humidity and heat.
The must be at least 200 mm free space to the front and rear of the
system unit, so that the unit is adequately ventilated. The fan areas on
the monitor and system unit should not be covered.
Do not place any objects over 40 kg in weight on the system unit and do
not stack several system units above one another.
We recommend you position the devices on a non-slip surface. Because
different coatings and varnishes are used on furniture, it is entirely
possible that the plastic feet on the device could damage the surface.
14
PRIMESTATION
U41270-J-Z916-2-76