Siemens SIMATIC ET 200SP System Manual page 176

Commissioning
10.3 Commissioning the ET 200SP on PROFIBUS DP
Commissioning procedure
To commission the ET 200SP distributed I/O system as a DP master on PROFIBUS DP, we
recommend the following procedure:
Table 10- 4
Step
1
2
3
4
5
6
7
8
9
10
176
Procedure for commissioning the ET 200SP as a DP master on the PROFIBUS DP
Procedure
Installing ET 200SP (with CPU and CM DP) Section Installation (Page 39)
Connecting ET 200SP
Supply voltages
•
PROFIBUS DP
•
Sensors and actuators
•
Inserting a SIMATIC memory card in the DP
master (CPU)
Configuring DP master (including
PROFIBUS address)
Switching on supply voltages for DP master
Switching on supply voltages for DP slaves
Download configuration to the DP master
Switching DP master to RUN
Checking LEDs
Testing inputs and outputs
See ...
Section Wiring (Page 49)
Section Removing/inserting a SIMATIC
memory card on the CPU (Page 180)
CPU 15xxSP-1 PN
(http://support.automation.siemens.com/
WW/view/en/90466439/133300) and CM
DP manual
CPU 15xxSP-1 PN
(http://support.automation.siemens.com/
WW/view/en/90466439/133300) manual
Documentation of the DP slave
STEP 7 online help
CPU 15xxSP-1 PN
(http://support.automation.siemens.com/
WW/view/en/90466439/133300) manual
CPU 15xxSP-1 PN
(http://support.automation.siemens.com/
WW/view/en/90466439/133300) manual
The following functions are helpful: Mon-
itoring and modifying tags, testing with
program status, forcing, controlling the
outputs. See section Test functions and
eliminating problems (Page 224)
Distributed I/O system
System Manual, 12/2015, A5E03576849-AF