Data Records And Functions - Siemens SIMATIC ET 200SP System Manual

Error messages
In case of error, the RDREC instruction returns the following error messages via the
STATUS block parameter while reading the feedback data record:
Table 9- 8
Error code
80B1
80B5
80B8
9.2.5

Data records and functions

Supported data records and functions
The table below shows a comparison of the supported data records and functions depending
on the CPU/interface module used.
Supported data rec-
ords and functions
Control data record
(V2)
Simplified control data
record (V1)
Read back control data
record *
Read feedback data
record
* You can read back the control data record with the RDREC instruction.
Distributed I/O system
System Manual, 12/2015, A5E03576849-AF
Error messages
H
H
H
CPU...
1510SP-1 PN 1512SP-1 PN
1510SP F-1 PN 1512SP F-1 PN
✓ ✓
-- --
✓ ✓
-- --
Configuration control (option handling)
Meaning
Invalid length; the length information in data record 197 is not
correct.
Configuration control not configured
Parameter error
The following events cause a parameter error:
Incorrect block ID in the header (not equal to 197)
•
Invalid version identifier in the header
•
A reserved bit was set
•
Multiple slots in the station master are assigned to the same
•
slot in the station option
Interface module (IM...)
155-6 PN HF 155-6 PN ST
✓
✓
✓
✓
9.2 Creating the control data record
155-6 PN BA
✓ ✓
✓ ✓
✓ ✓
✓ ✓
155-6 DP HF
✓
--
✓
✓
157