Siemens SIMATIC ET 200SP System Manual page 22

System overview
2.4 Components
Basic component
BusAdapter
22
Function
The BusAdapters allow free selection of the
connection technology for PROFINET IO. The
following versions are available for
PROFINET CPU/interface modules:
For standard RJ45 connector (BA 2×RJ45)
•
①
For direct connection of the bus cable
•
②
(BA 2×FC)
For POF/PCF fiber-optic cable (BA
•
③
2xSCRJ)
As media converter for POF/PCF fiber-
•
optic cable ⇔ standard RJ45 plug (BA
④
SCRJ/RJ45)
As media converter for POF/PCF fiber-
•
optic cable ⇔ direct connection of the bus
⑤
cable (BA SCRJ/FC)
For glass fiber-optic cable (BA 2xLC)
•
As media converter for glass fiber-optic
•
cable ⇔ standard RJ45 plug (BA LC/RJ45)
⑦
As media converter for glass fiber-optic
•
cable ⇔ direct connection of the bus cable
⑧
(BA LC/FC)
For mixed ET 200SP/ET 200AL configuration,
you require the BusAdapter BA-Send 1xFC
①
(plugged into the BaseUnit BU-Send).
Connect the bus cable for ET-Connection to
the BusAdapter BA-Send 1xFC.
⑥
System Manual, 12/2015, A5E03576849-AF
Figure
Distributed I/O system