Siemens SIMATIC ET 200SP System Manual page 233

IECEx approval
According to IEC 60079-15 (Explosive atmospheres - Part 15: Equipment protection by type
of protection "n") and IEC 60079-0 (Explosive atmospheres - Part 0: Equipment - General
requirements)
Marking for Australia and New Zealand
The ET 200SP distributed I/O system meets the requirements of the standard
AS/NZS CISPR 16.
Korea Certificate KCC-REM-S49-ET200SP
Note that this device corresponds to limit class A in terms of the emission of radio frequency
interference. This device can be used in all areas, except residential areas.
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
Marking for the Eurasian Customs Union
EAC (Eurasian Conformity)
Customs Union of Russia, Belarus and Kazakhstan
Declaration of conformity with the technical requirements of the Customs Union (TR CU).
IEC 61131
The ET 200SP distributed I/O system meets the requirements and criteria of the standard
IEC 61131-2 (Programmable logic controllers, part 2: Equipment requirements and tests).
PROFINET standard
The ET 200SP distributed I/O system is based on IEC 61158 Type 10.
PROFIBUS standard
The ET 200SP distributed I/O system is based on IEC 61158 Type 3.
Distributed I/O system
System Manual, 12/2015, A5E03576849-AF
Technical specifications
14.1 Standards and approvals
233