Siemens SIMATIC ET 200SP System Manual page 83

BA 2xLC BusAdapter mounted
①
②
③
Figure 5-22
Reusing fiber-optic cable
Note
If you are reusing fiber-optic cables, you must shorten both fiber-optic cores by the amount
of the curved lengths and reassemble the connectors. This will prevent any attenuation
losses caused by re-bent, heavily stressed portions of the fiber-optic cores.
Reference
For more information on the installation guidelines for fiber-optic cables, refer to the
SIMATIC NET PROFIBUS Network Manual
(http://support.automation.siemens.com/WW/view/en/35222591).
Distributed I/O system
System Manual, 12/2015, A5E03576849-AF
Interface module
BA 2xLC BusAdapter
PROFINET glassfiber connecting cable
Connecting the BA 2xLC BusAdapter to the interface module
5.9 Connecting interfaces for communication
Wiring
83