White Indicator Lights - Jeep Gladiator 2020 Owner's Manual

190 GETTING TO KNOW YOUR INSTRUMENT PANEL
NOTE:
• A continuous chime will sound if the vehicle is driven
more than 1 mile (1.6 km) with either turn signal on.
• Check for an inoperative outside light bulb if either indi-
cator flashes at a rapid rate.

White Indicator Lights

— Adaptive Cruise Control (ACC) Ready Light — If
Equipped
This light will turn on when the vehicle equipped with
Adaptive Cruise Control (ACC) has been turned on, but not
set. Refer to "Adaptive Cruise Control (ACC)" in "Starting
And Operating" for further information.
— Two Wheel Drive High Indicator Light — If
Equipped With a Premium Cluster
This light alerts the driver that the vehicle is in the two wheel
drive high mode.
— Rear Seat Belt Fastened Indicator Light — If
Equipped
This light indicates when a rear seat belt has been buckled in
the second row. A telltale will display in the upper right
corner of the instrument cluster display to correspond to the
specific seating position once the seat belt has been buckled.
Refer to "Occupant Restraint Systems" in "Safety" for
further information.
— Rear Seat Belt Reminder Indicator Light — If
Equipped
This light indicates when a rear seat belt is unbuckled in the
second row. When the ignition is first placed in the ON/
RUN or ACC/ON/RUN position, and if a seat belt in the
second row is unbuckled, a light corresponding to the
specific seat will turn on in the upper right portion of the
instrument cluster display, momentarily replacing the
configurable corner information. If a second row seat belt
that was buckled at the start of the trip is unbuckled, the Rear
Seat Belt Reminder Light will change from the buckled to the
unbuckled symbol, and a chime will sound.
Refer to "Occupant Restraint Systems" in "Safety" for
further information.