Fuses; General Information - Jeep Gladiator 2020 Owner's Manual

Hide thumbs Also See for Gladiator 2020:
Table of Contents

Advertisement

4. Rotate the appropriate socket a quarter turn counter-
clockwise, then remove it from the housing.
5. Pull the bulb straight from the socket to replace.
Center High Mounted Stop Lamp (CHMSL)
The stop lamp is mounted on the tailgate. If service is
needed, obtain the LED assembly from an authorized dealer.
License Plate Lamps
See an authorized dealer to replace these LED assemblies.

FUSES

WARNING!
• When replacing a blown fuse, always use an appro-
priate replacement fuse with the same amp rating as the
original fuse. Never replace a fuse with another fuse of
higher amp rating. Never replace a blown fuse with
metal wires or any other material. Failure to use proper
fuses may result in serious personal injury, fire and/or
property damage.
• Before replacing a fuse, make sure that the ignition is
off and that all the other services are switched off and/
or disengaged.
• If the replaced fuse blows again, contact an authorized
dealer.
• If a general protection fuse for safety systems (air bag
system, braking system), power unit systems (engine
system, gearbox system) or steering system blows,
contact an authorized dealer.

General Information

The fuses protect electrical systems against excessive elec-
trical current.
When a device does not work, you must check the fuse
element inside the blade fuse for a break/melt.
Also, please be aware that when using power outlets for an
extended periods of time with the engine off it may result in
vehicle battery discharge.
(Continued)
IN CASE OF EMERGENCY
WARNING! (Continued)
399
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents