Table of Contents
Advertisement
376 STARTING AND OPERATING
6. Turn the engine OFF.
7. Shift the transfer case lever to the desired position.
NOTE:
When shifting the transfer case out of NEUTRAL (N), the
engine should remain OFF to avoid gear clash.
8. Shift the automatic transmission into PARK, or place
manual transmission in NEUTRAL.
9. Release the brake pedal.
10. Disconnect vehicle from the tow vehicle.
11. Start the engine.
12. Press and hold the brake pedal.
13. Release the parking brake.
14. Shift the transmission into gear, release the brake pedal
(and clutch pedal on manual transmissions), and check
that the vehicle operates normally.
DRIVING TIPS
On-Road Driving Tips
Utility vehicles have higher ground clearance and a
narrower track to make them capable of performing in a
wide variety of off-road applications. Specific design charac-
teristics give them a higher center of gravity than conven-
tional passenger cars.
An advantage of the higher ground clearance is a better view
of the road, allowing you to anticipate problems. They are
not designed for cornering at the same speeds as conven-
tional passenger cars any more than low-slung sports cars
are designed to perform satisfactorily in off-road conditions.
Avoid sharp turns or abrupt maneuvers. As with other vehi-
cles of this type, failure to operate this vehicle correctly may
result in loss of control or vehicle rollover.
Hide quick links:
Advertisement
Table of Contents
