To Manually Turn Off The Stop/Start System; To Manually Turn On The Stop/Start System; System Malfunction - Jeep Gladiator 2020 Owner's Manual

To Manually Turn Off The Stop/Start System

1. Push the STOP/START Off switch (located on the switch
bank). The light on the switch will illuminate.
STOP/START Off Switch
2. The STOP/START OFF message will appear in the
instrument cluster. Refer to "Instrument Cluster Display"
in "Getting To Know Your Instrument Panel" for further
information.
3. At the next vehicle stop (after turning off the Stop/Start
system), the engine will not be stopped.
4. If the Stop/Start system is manually turned off, the
engine can only be started and stopped by cycling the
ignition switch.
5. The Stop/Start system will reset itself back to an ON
condition every time the ignition is turned off and back
on.

To Manually Turn On The Stop/Start System

Push the STOP/START OFF switch (located on the switch
bank). The light on the switch will turn off.

System Malfunction

If there is a malfunction in the Stop/Start system, the system
will not shut down the engine. A "SERVICE STOP/START
SYSTEM" message will appear in the instrument cluster
display. Refer to "Instrument Cluster Display" in "Getting to
Know Your Instrument Panel" for further information.
If the "SERVICE STOP/START SYSTEM" message appears
in the instrument cluster display, have the system checked
by an authorized dealer.
STARTING AND OPERATING 317
5