Table of Contents
Advertisement
156 GETTING TO KNOW YOUR VEHICLE
To remove the utility rail cleats from the utility rail, slide the
cleat to the rectangular cutout located at the end of the rail.
TONNEAU COVER — IF EQUIPPED
The Tonneau Cover can be installed on the truck bed to keep
cargo out of view, and protect from inclement weather.
The Tonneau Cover consists of the following features:
• Easy roll up cover
• Tonneau fore/aft locator
• Crossbar inside bed locator
• Rear latches
• Stowage straps
NOTE:
The Tonneau Cover can be rolled up and secured at the front
of the truck bed without removing it completely.
Tonneau Cover Installation
To install the Tonneau Cover, proceed as follows:
1. Position the rolled up Tonneau Cover on the truck bed
and align it to the two fastener locations at the front of the
bed.
Fastener Locations
2. Using a #T50 Torx head driver, secure the fasteners to the
bed.
3. Lower the tailgate to the fully open position before
unrolling the Tonneau Cover.
Hide quick links:
Advertisement
Table of Contents
