Bulb Replacement - Jeep Gladiator 2020 Owner's Manual

396 IN CASE OF EMERGENCY

Bulb Replacement

NOTE:
Lens fogging can occur under certain atmospheric condi-
tions. This will usually clear as atmospheric conditions occur
to allow the condensation to change back into a vapor.
Turning the lamps on will usually accelerate the clearing
process.
Halogen Headlamps
NOTE:
We advise referring to an authorized dealer for service.
1. Open hood and support using prop rod.
2. Remove the front grille. Turn the retainers along the top
a quarter turn counterclockwise and remove.
3. Pull the bottom of the grille away, starting at one side and
working toward the other.
4. Remove the three screws holding the headlamp to the
vehicle.
5. Remove lamp from the vehicle.
6. Remove the lamp from the collar.
7. Grasp the bulb and turn a quarter turn counterclockwise.
8. Pull the bulb from the housing.
9. Push connector locking tab to the unlock position.
10. Remove connector from bulb.
11. Push connector onto new bulb base, and push the
connector locking tab to the lock position.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the bulb
comes in contact with any oily surface, clean the bulb
with rubbing alcohol.
12. Reinstall bulb housing. Rotate the bulb a quarter turn
clockwise.