Jump Starting Procedure - Jeep Gladiator 2020 Owner's Manual

426 IN CASE OF EMERGENCY
WARNING!
Do not allow vehicles to touch each other as this could
establish a ground connection and personal injury could
result.

Jump Starting Procedure

WARNING!
Failure to follow this jump starting procedure could
result in personal injury or property damage due to
battery explosion.
CAUTION!
Failure to follow these procedures could result in
damage to the charging system of the booster vehicle or
the discharged vehicle.
NOTE:
Make sure at all times that unused ends of jumper cables are
not contacting each other or either vehicle while making
connections.
Connecting The Jumper Cables
Jumper Cable Connections
1. Connect the positive (+) end of the jumper cable to the
remote positive (+) post of the discharged vehicle.
2. Connect the opposite end of the positive (+) jumper cable
to the positive (+) post of the booster battery.
3. Connect the negative end (-) of the jumper cable to the
negative (-) post of the booster battery.