Instrument Cluster Display - Jeep Gladiator 2020 Owner's Manual

166 GETTING TO KNOW YOUR INSTRUMENT PANEL
WARNING!
A hot engine cooling system is dangerous. You or others
could be badly burned by steam or boiling coolant. You
may want to call an authorized dealer for service if your
vehicle overheats.
CAUTION!
Driving with a hot engine cooling system could damage
your vehicle. If the temperature gauge reads "H" pull
over and stop the vehicle. Idle the vehicle with the air
conditioner turned off until the pointer drops back into
the normal range. If the pointer remains on the "H", turn
the engine off immediately and call an authorized dealer
for service.

3. Instrument Cluster Display

• The instrument cluster display features a driver-inter-
active display. Refer to "Instrument Cluster Display" in
"Getting To Know Your Instrument Panel" for further
information.
4. Fuel Gauge
• The pointer shows the level of fuel in the fuel tank
when the ignition switch is in the ON/RUN position.
• The fuel pump symbol points to the side of the
vehicle where the fuel filler door is located.
5. Speedometer
• Indicates vehicle speed.
INSTRUMENT CLUSTER DISPLAY
Your vehicle may be equipped with an instrument cluster
display, which offers useful information to the driver. With
the ignition in the OFF mode, opening/closing of a door will
activate the display for viewing, and display the total miles
(kilometers) in the odometer. Your instrument cluster
display is designed to display important information about
your vehicle's systems and features. The Driver Interactive
Display, located in the instrument panel, indicates how
systems are operating and gives you warnings when a
system, or systems, needs your attention. The steering wheel
mounted controls allow you to scroll through and enter the
main menus and submenus. You can access the specific
information you want to make selections and adjustments.