White Indicator Lights; Blue Indicator Lights; Gray Indicator Lights; Onboard Diagnostic System - Obd Ii - Jeep Compass 2023 Owner's Manual

88 GETTING TO KNOW YOUR INSTRUMENT PANEL
Automatic High Beam Indicator Light —
If Equipped
This indicator shows that the automatic high
beam headlights are on
Ú
W I L
HITE NDICATOR IGHTS
Active Lane Management Indicator Light —
If Equipped
When the Active Lane Management system is
ON, but not armed, the Active Lane
Management indicator light illuminates solid
white. This occurs when only left, right, or
neither lane line has been detected. If a single lane line is
detected, the system is ready to provide only visual
warnings if an unintentional lane departure occurs on
the detected lane line page 128.
Ú
Hill Descent Control (HDC) Indicator
Light — If Equipped
This indicator shows when the HDC feature is
turned on. The light will be on solid when HDC
is armed. HDC can only be armed when the
transfer case is in the 4WD Low position and
the vehicle speed is less then 30 mph (48 km/h). If these
conditions are not met while attempting to use the HDC
feature, the HDC indicator light will flash on/off.
Cruise Control Ready Indicator Light —
If Equipped With A Premium Instrument
Cluster
page 38.
This light will turn on when the Cruise Control
has been turned on, but not set
Cruise Control SET Indicator
Light — If Equipped
This indicator light will illuminate when the
Cruise Control is set
B I
LUE NDICATOR
High Beam Indicator Light
This indicator light will illuminate to indicate
that the high beam headlights are on. With the
low beams activated, push the multifunction
lever forward (toward the front of the vehicle) to
turn on the high beams. Pull the multifunction lever
rearward (toward the rear of the vehicle) to turn off the
high beams. If the high beams are off, pull the lever toward
you for a temporary high beam on, "flash to pass"
scenario.
G
Cruise Control Ready Indicator Light —
If Equipped With Base Instrument Cluster
page 104.
Ú
ONBOARD DIAGNOSTIC SYSTEM — OBD II
Your vehicle is equipped with a sophisticated Onboard
Diagnostic system called OBD II. This system monitors the
page 104.
Ú
performance of the emissions, engine, and automatic
transmission control systems. When these systems are
L
IGHTS operating properly, your vehicle will provide excellent
performance and fuel economy, as well as emissions well
within current government regulations.
If any of these systems require service, the OBD II system
will turn on the Malfunction Indicator Light (MIL). It will
also store diagnostic codes and other information to
assist your service technician in making repairs. Although
your vehicle will usually be drivable and not need towing,
see an authorized dealer for service as soon as possible.
I L
RAY NDICATOR IGHTS
This light will turn on when the Cruise Control
has been turned on, but not set
CAUTION!
 Prolonged driving with the MIL on could cause further
damage to the emission control system. It could also
affect fuel economy and driveability. The vehicle
must be serviced before any emissions tests can
be performed.
page 104.
Ú
(Continued)