To Stow The Flat Or Spare - Jeep Gladiator 2020 Owner's Manual

Hide thumbs Also See for Gladiator 2020:
Table of Contents

Advertisement

420 IN CASE OF EMERGENCY

To Stow The Flat Or Spare

WARNING!
A loose tire or jack thrown forward in a collision or hard
stop could endanger the occupants of the vehicle.
Always stow the jack parts and the spare tire in the
places provided. Have the deflated (flat) tire repaired or
replaced immediately.
1. Turn the wheel so that the valve stem is facing upward
and toward the rear of the vehicle for convenience in
checking the spare tire inflation. Slide the wheel retainer
through the center of the wheel.
2. Lift the spare tire with one hand to give clearance to tilt
the retainer at the end of the cable and position it properly
across the wheel opening.
Reinstalling The Retainer
3. Attach the lug wrench to the extension tubes with the
curved angle facing away from the vehicle. Insert the
extension tubes through the access hole between the
lower tailgate and the top of the bumper and into the
winch mechanism tube.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents