Table of Contents
Advertisement
130
GETTING TO KNOW YOUR INSTRUMENT PANEL
Stop/Start Active Indicator Light —
If Equipped
This indicator light will illuminate when the
Stop/Start function is in "Autostop" mode.
Turn Signal Indicator Lights
When the left or right turn signal is activated,
the turn signal indicator will flash
independently and the corresponding exterior
turn signal lamps will flash. Turn signals can
be activated when the multifunction lever is moved
down (left) or up (right).
NOTE:
A continuous chime will sound if the vehicle is driven
more than 1 mile (1.6 km) with either turn signal on.
Check for an inoperative outside light bulb if either indi-
cator flashes at a rapid rate.
Rear Seat Belt Fastened Indicator Light —
If Equipped With A Premium Instrument
Cluster
This light indicates when a rear seat belt has
been buckled in the second row. A telltale will
display in the upper right corner of the
instrument cluster display to correspond to the
specific seating position once the seat belt has been
buckled
page 277.
Ú
W
I
L
HITE
NDICATOR
IGHTS
Adaptive Cruise Control (ACC) Ready
Indicator Light — If Equipped With a
Premium Instrument Cluster
This light will turn on when the vehicle
equipped with Adaptive Cruise Control (ACC)
has been turned on, but not set.
Adaptive Cruise Control (ACC) Ready
Indicator Light — If Equipped With a Base
Instrument Cluster
This light will turn on when the vehicle
equipped with ACC has been turned on, but
not set.
Adaptive Cruise Control (ACC) Set Indicator
Light — If Equipped With a Base Instrument
Cluster
This light will turn on when the vehicle
equipped with ACC has been turned on, but
not set.
Two-Wheel Drive High Indicator Light —
If Equipped With A Premium Instrument
Cluster
This light alerts the driver that the vehicle is in
the Two-Wheel Drive High mode.
Rear Seat Belt Fastened Indicator Light —
If Equipped With A Base Instrument
Cluster
This light indicates when a rear seat belt has
been buckled in the second row. A telltale will
display in the upper right corner of the
instrument cluster display to correspond to the
specific seating position once the seat belt has been
buckled.
Rear Seat Belt Reminder Indicator Light —
If Equipped With A Base Instrument
Cluster
This light indicates when a rear seat belt is
unbuckled in the second row. When the ignition
is first placed in the ON/RUN or ACC/ON/RUN
position, and if a seat belt in the second row is
unbuckled, a light corresponding to the specific seat will
turn on in the upper right portion of the instrument cluster
display, momentarily replacing the configurable corner
information. If a second row seat belt that was buckled at
the start of the trip is unbuckled, the Rear Seat Belt
Reminder Light will change from the buckled to the
unbuckled symbol, and a chime will sound.
Advertisement
Table of Contents
