464 SERVICING AND MAINTENANCE
Transfer Case
Selection Of Lubricant
Use only the manufacturer's recommended fluid. Refer to
"Fluids And Lubricants" in "Technical Specifications" for
further information.
Fluid Level Check
The fluid level should be to the bottom edge of the fill hole
when the vehicle is in a level position.
Transfer Case
1 — Fill Hole
2 — Drain Hole
Drain And Refill
Refer to the "Maintenance Plan" located in "Scheduled
Servicing" in "Servicing And Maintenance" for the proper
maintenance intervals.
Manual Transmission — If Equipped
Selection Of Lubricant
Use only manufacturer's recommended manual transmis-
sion fluid. Refer to "Fluids And Lubricants" in "Technical
Specifications" for further information.
Fluid Level Check
Check the fluid level by removing the fill plug. The fluid
level should be between the bottom of the fill hole and a
point not more than 3/16 of an inch (4.76 mm) below the
bottom of the hole.
Add fluid, if necessary, to maintain the proper level.