Shifting - Jeep Gladiator 2020 Owner's Manual

290 STARTING AND OPERATING
Manual Transmission Shifter
To shift the gears, fully press the clutch pedal and place the
gear selector into the desired gear position (the diagram for
the engagement of the gears is displayed on the handle of the
selector).
To engage REVERSE gear from the NEUTRAL position, lift
the REVERSE ring, located below the knob and move the
gear selector all the way left and then forward.
Shift Pattern

Shifting

Fully press the clutch pedal before shifting gears. As you
release the clutch pedal, lightly press the accelerator pedal.
You should always use first gear when starting from a
standing position.
NOTE:
A certain amount of noise from the transmission is normal.
This noise can be most noticeable when the vehicle is idling
in NEUTRAL with the clutch engaged (clutch pedal
released), but it may also be heard when driving. The noise
may also be more noticeable when the transmission is warm.
This noise is normal and is not an indication of a problem
with your clutch or transmission.