Rear Head Restraints - Jeep Gladiator 2020 Owner's Manual

58 GETTING TO KNOW YOUR VEHICLE
WARNING! (Continued)
• ALL the head restraints MUST be reinstalled in the
vehicle to properly protect the occupants. Follow the
reinstallation instructions above prior to operating the
vehicle or occupying a seat.
NOTE:
Do not reposition the head restraint 180 degrees to the incor-
rect position in an attempt to gain additional clearance to the
back of the head.

Rear Head Restraints

The rear seat is equipped with nonadjustable, but foldable,
outboard head restraints, as well as an adjustable, removable
center head restraint.
To fold down the outboard head restraints, push the button
located on the outboard side of the head restraint.
Rear Foldable Outboard Head Restraints
To return the head restraint to its upward position, lift up on
the head restraint until it locks into place.
To raise the center head restraint, lift up on the head
restraint. To lower the center head restraint, push the adjust-
ment button, located at the base of the head restraint, and
push down on the head restraint.
To remove the center head restraint, raise it as far as it can go.
Then, push the adjustment button and the release button at
the base of each post while pulling the head restraint up.