Table of Contents
Advertisement
32 GETTING TO KNOW YOUR VEHICLE
La operación de este equipo está sujeta a las siguientes dos
condiciones:
1. es posible que este equipo o dispositivo no cause interfer-
encia perjudicial y
2. este equipo o dispositivo debe aceptar cualquier interfer-
encia, incluyendo la que pueda causar su operación no
deseada.
NOTE:
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
VEHICLE SECURITY ALARM — IF EQUIPPED
The Vehicle Security Alarm monitors the vehicle doors for
unauthorized entry and the ignition switch for unauthorized
operation. When the alarm is activated, the interior switches
for door locks are disabled. The Vehicle Security Alarm
provides both audible and visible signals. If something trig-
gers the alarm, the Vehicle Security Alarm will provide the
following audible and visible signals: the horn will pulse, the
park lamps and/or turn signals will flash, and the vehicle
security light in the instrument cluster will flash.
To Arm The System
Follow these steps to arm the Vehicle Security Alarm:
1. Make sure the vehicle's ignition is cycled to the OFF posi-
tion. Refer to "Starting The Engine" in "Starting And
Operating" for further information.
2. Perform one of the following methods to lock the vehicle:
• Push the lock button on the interior power door lock
switch with the driver and/or passenger door open.
• Push the lock button on the exterior Passive Entry door
handle with a valid key fob available in the same exte-
rior zone. Refer to "Keyless Enter-N-Go — Passive
Entry" in "Getting To Know Your Vehicle" for further
information.
• Push the lock button on the key fob.
3. If any doors are open, close them.
NOTE:
The Vehicle Security Alarm will not arm if you lock the doors
using the manual door lock.
Hide quick links:
Advertisement
Table of Contents
