How To Use Remote Start - Jeep Gladiator 2020 Owner's Manual

How To Use Remote Start

• Push the Remote Start button on the key fob twice within
five seconds. Pushing the Remote Start button a third time
shuts the engine OFF.
• To drive the vehicle, push the unlock button, and place the
ignition in the ON/RUN position.
• With remote start, the engine will only run for 15 minutes
(timeout) unless the ignition key is placed in the ON/RUN
position.
• The vehicle must be started with the key after two consec-
utive timeouts.
All of the following conditions must be met before the engine
will remote start:
• Gear selector in PARK
• Doors closed
• Hood closed
• Hazard switch off
• Brake switch inactive (brake pedal not pushed)
• Battery at an acceptable charge level
• Panic button not pushed
• System not disabled from previous remote start event
GETTING TO KNOW YOUR VEHICLE
• Vehicle alarm system indicator flashing
• Ignition in STOP/OFF position
• Fuel level meets minimum requirement
• All removable doors must not be removed
• Malfunction indicator light not illuminated
WARNING!
• Do not start or run an engine in a closed garage or
confined area. Exhaust gas contains Carbon Monoxide
(CO) which is odorless and colorless. Carbon
Monoxide is poisonous and can cause serious injury or
death when inhaled.
• Keep key fobs away from children. Operation of the
Remote Start System, windows, door locks or other
controls could cause serious injury or death.
27
2