ABB Relion 670 Series Applications Manual page 458

Section 18
Station communication
The high and low limit settings provides limits for the high-high-, high, normal, low and low-low
ranges of the measured value. The actual range of the measured value is shown on the range
output of MVGAPC function block. When a Measured value expander block (RANGE_XP) is
connected to the range output, the logical outputs of the RANGE_XP are changed accordingly.
18.2.6 IEC 61850-8-1 redundant station bus communication
18.2.6.1 Identification
Function description LHMI and ACT
Dual ethernet port
link status
IEC 62439-3 parallel
redundancy
protocol
18.2.6.2 Application
Dual ethernet port link status (PRPSTATUS) together with IEC 62439-3 parallel redundancy
protocol (PRP) are used to supervise and assure redundant Ethernet communication over two
channels. This will secure data transfer even though one communication channel might not be
available for some reason. Together PRPSTATUS and PRP provide redundant communication over
station bus running IEC 61850-8-1 protocol. The redundant communication use both port AB and
CD on OEM module.
452
IEC 61850
identification identification
PRPSTATUS PRPSTATUS
PRP PRP
GUID-FF43A130-7D2D-4BA3-B51C-80398D73228F v2
GUID-00C469E6-00D4-4780-BD0D-426647AB8E0F v3.1.1
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
- -
GUID-5B5581EA-4306-404B-98A7-7BDA6A306E7B v2.1.1
1MRK 511 358-UUS A
Application manual