ABB Relion 670 Series Applications Manual page 452

Section 17
Metering
for oscillation can be changed on the local HMI and PCM600 under Main menu/Configuration/I/O
modules.
17.2 Function for energy calculation and demand handling
ETPMMTR
17.2.1 Identification
Function description
Function for energy calculation and
demand handling
17.2.2 Application
Energy calculation and demand handling function (ETPMMTR) is intended for statistics of the
forward and reverse active and reactive energy. It has a high accuracy basically given by the
measurements function (CVMMXN). This function has a site calibration possibility to further
increase the total accuracy.
The function is connected to the instantaneous outputs of (CVMMXN) as shown in figure 208.
P
Q
STARTACC
STOPACC
RSTACC
RSTDMD
IEC13000190 V1 EN-US
Figure 208: Connection of energy calculation and demand handling function ETPMMTR to the
The energy values can be read through communication in MWh and MVArh in monitoring tool of
PCM600 and/or alternatively the values can be presented on the local HMI. The local HMI graphical
display is configured with PCM600 Graphical Display Editor tool (GDE) with a measuring value
446
The setting is common for all input channels on BIM, that is, if limit changes are
made for inputs not connected to the pulse counter, the setting also influences the
inputs on the same board used for pulse counting.
ETPMMTR
ACCINPRG
EAFPULSE
EARPULSE
ERFPULSE
ERRPULSE
EAFALM
EARALM
ERFALM
ERRALM
EAFACC
EARACC
ERFACC
ERRACC
MAXPAFD
MAXPARD
MAXPRFD
MAXPRRD
IEC13000184-1-en.vsd
measurements function (CVMMXN)
IEC 61850 IEC 60617
identification identification
ETPMMTR W_Varh
1MRK 511 358-UUS A
ANSI/IEEE C37.2
device number
-
Application manual
SEMOD153638-1 v2
SEMOD175537-2 v4
SEMOD175546-4 v5