ABB Relion 670 Series Applications Manual page 409

1MRK 511 358-UUS A
15.4.1.2 Application
Group warning logic function WRNCALH is used to route warning signals to LEDs and/or output
contacts on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to adapt the warning
signal to physical tripping outputs according to the specific application needs.
15.4.1.3 Setting guidelines
OperationEnabled or Disabled
15.5 Logic for group indication INDCALH
15.5.1 Logic for group indication INDCALH
15.5.1.1 Identification
Function description
Logic for group indication
15.5.1.2 Application
Group indication logic function INDCALH is used to route indication signals to different LEDs
and/or output contacts on the IED.
INDCALH output signal IND and the physical outputs allows the user to adapt the indication signal
to physical outputs according to the specific application needs.
15.5.1.3 Setting guidelines
Operation : Enabled or Disabled
15.6 Configurable logic blocks
The configurable logic blocks are available in two categories:
• Configurable logic blocks that do not propagate the time stamp and the quality of signals.
They do not have the suffix QT at the end of their function block name, for example,
SRMEMORY. These logic blocks are also available as part of an extension logic package with
the same number of instances.
• Configurable logic blocks that propagate the time stamp and the quality of signals. They have
the suffix QT at the end of their function block name, for example, SRMEMORYQT.
Application manual
IEC 61850 IEC 60617
identification identification
INDCALH -
GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1
GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v3
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v3
ANSI/IEEE C37.2
device number
-
GUID-9BAD30FB-4B75-4E14-82A8-6A59B09FA6EA v1
GUID-7E776D39-1A42-4F90-BF50-9B38F494A01E v2
Section 15
Logic
IP11009-1 v3
403