Delete Snmp Group - D-Link DGS-3000 Series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
v2c - The second least secure of the possible security models.
v3 - The most secure of the possible.
noauth_nopriv - Neither support packet authentication nor encrypting.
auth_nopriv - Support packet authentication.
auth_priv - Support packet authentication and encrypting.
read_view - (Optional) Specifies that the view name would be read.
<view_name 32> - Enter the read view name here. This name can be up to 32 characters
long.
write_view - (Optional) Specifies that the view name would be write.
<view_name 32> - Enter the wite view name here. This name can be up to 32 characters
long.
notify_view - (Optional) Specifies that the view name would be notify.
<view_name 32> - Enter the notify view name here. This name can be up to 32 characters
long.
Restrictions
Only Administrators can issue this command.
Example
To create SNMP group "group123":
DGS-3000-26TC:admin#create snmp group group123 v3 auth_priv read_view
CommunityView write_view CommunityView notify_view CommunityView
Command: create snmp group group123 v3 auth_priv read_view CommunityView
write_view CommunityView notify_view CommunityView
Success.
DGS-3000-26TC:admin#
69-8

delete snmp group

Description
This command is used to remove a SNMP group.
Format
delete snmp group <groupname 32>
Parameters
<groupname 32> - The name of the group will be deleted.
Restrictions
Only Administrators can issue this command.
Example
To delete SNMP group "group123":
605