Delete Ipv6Route; Show Ipv6Route - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
36-2

delete ipv6route

Description
This command is used to delete an IPv6 static route. If the next hop is a global address, it is not
needed to indicate the interface name. If the next hop is a link local address, then the interface
name must be specified.
Format
delete ipv6route [default] [<ipif_name 12> <ipv6addr> | <ipv6addr> | all]
Parameters
default - Specifies the default route.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters
long.
<ipv6addr> - Specifies the next hop address for the default route.
all - Specifies that all static created routes will be deleted.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
Delete an IPv6 static route:
DWS-3160-24PC:admin# delete ipv6route default System 3FFC::
Command: delete ipv6route default System 3FFC::
Success.
DWS-3160-24PC:admin#
36-3

show ipv6route

Description
This command is used to display IPv6 routes.
Format
show ipv6route
Parameters
None.
Restrictions
None.
385