Basic Switch Commands - D-Link DGS-1210/ME series Reference Manual

The Basic Switch commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
enable password
encryption
disable password
encryption
create account
config account
show account
delete account
reset account
show session
show switch
show environment
enable jumbo_frame
disable jumbo_frame
show jumbo_frame
show serial_port
config serial_port
config bootrom
password
enable clipaging
disable clipaging
enable web
disable web
enable autoconfig
disable autoconfig
config autoconfig
show autoconfig
enable auto learning
disable auto learning
save
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Parameter
[admin | operator | power-user | user] <username 15>
<username 15>
<username 15>
{baud_rate [9600 | 19200 | 38400 | 115200] | auto_logout [never | 2_minutes |
5_minutes | 10_minutes | 15_minutes]}
<string20>
{<tcp_port_number 1-65535>}
timeout <value 1-65535>
{[config config_id <value 1-2> | log]}

BASIC SWITCH COMMANDS

10
4