[41 L] Host Pbx Access Codes - Panasonic KX-TD308 Installation Manual

4 6 Outside Line Programming
l
Description
Selection
Default
Programming
Host PBX Access Codes
Assigns Host PBX or Centrex access codes. If the.system is
installed behind a host PBX or a Centrex system, an access code is
required to make an outside / Centrex call or to access Centrex
features. Up to four codes can be stored for an outside line
assigned to the line.
Outside line (CO) number: 1 through 3, * ( * =all outside lines)
l
Access code: 1 or 2 digits, four different entries (max.)
l
All outside lines - Not stored
1. Enter 411.
Display: 411 HOST PBX #'S
2.
Press NEXT.
Display: CO Line NO?+
3. Enter an outside line number.
To enter outside line number 1, you can also press NEXT.
Display example: COl: , , ,
4. Enter an access code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new access code.
Display example: COl:Ol, , ,
5.
To enter more access codes for the same outside line, press
are completed.
Display example: CO1:01,08,10,22
6.
Press STORE.
7.
To program another outside line, press NEXT or PREV, or
SELECT and the desired outside line number.
8.
Repeat steps 4 through 7.
9.
Press END.
4 1 1
4-103 *