Maintaining E-Series Routers; Required Tools And Items - Juniper E Series Hardware Manual

Chapter 9

Maintaining E-series Routers

Required Tools and Items

This chapter lists the tools, items, and steps needed for installing and uninstalling
E-series components. Other maintenance procedures must be performed by an
authorized Juniper Networks technician.
Topic
Required Tools and Items
Storing Modules and Components
Cleaning the System
Upgrading NVS Cards on SRP Modules
Upgrading Memory on SRP Modules
Replacing SFPs on GE I/O Modules
Replacing Fan Trays
Installing a Cable-Management Bracket on ERX-7xx Models
You will need the following tools and other items to replace E-series components.
! Flathead and Phillips screwdrivers
! Insulated adjustable wrench
! Antistatic wrist strap
! Antistatic bags (or other protective packaging to hold components)
! Plastic boots or other protective cover for fiber-optic SC and LC connectors
Page
83
84
84
84
87
90
93
96

Required Tools and Items

!
83