3-16
ENGINE
OIL PUMP
• Remove the circlip 1 and oil pump driven gear 2.
• Remove the pin 3.
• Remove the oil pump 4.
"
Do not attempt to disassemble the oil pump assembly.
GEARSHIFT
• Remove the gearshift shaft 5.
• Remove the pawl lifter 6 and cam guide 7.
• Remove the gearshift cam driven gear 8.
NOTE:
When removing the cam driven gear 8, do not lose the pawls
9, pins 0 and springs A.
PRIMARY DRIVE GEAR
• Flatten the lock washer of the primary drive gear nut B.