Suzuki RV125 Service Manual page 91

• Install the gearshift cam driven gear assembly.
• Install the pawl lifter 1 and cam guide 2.
NOTE:
Apply a small quantity of THREAD LOCK to the threads of the
screws.
* 99000-32050: THREAD LOCK "1342"
• Install the return spring 3 to the gearshift shaft 4.
• Install the gearshift shaft.
NOTE:
Align the center teeth on the gearshift shaft with the center teeth
on the gearshift cam driven gear.
OIL PUMP
• Apply engine oil to the sliding surfaces of the oil pump case,
outer rotor, inner rotor and shaft, before mounting the oil
pump.
• Apply a small quantity of THREAD LOCK to the oil pump
mounting screws and tighten them.
* 99000-32050: THREAD LOCK "1342"
• Install the pin 5.
• Install the oil pump driven gear 6 and E-ring 7.
ENGINE 3-55