Suzuki RV125 Service Manual page 97

• Place the cylinder head onto the cylinder.
• Cylinder head nuts and washers must be installed correctly as
shown in the illustration.
A Copper washer
B Steel washer
• Tighten the cylinder head nuts to the specified torque in a
crisscross pattern.
# Cylinder head nut: Initial 10 N·m (1.0 kgf-m)
• Tighten the cylinder base nuts 1 and cylinder head nuts 2 to
the specified torque.
# Cylinder base nut 1: 10 N·m (1.0 kgf-m)
Cylinder head nut 2: 10 N·m (1.0 kgf-m)
CAMSHAFT
• Turn the crankshaft counterclockwise, and align the line A on
the generator rotor with the mark B on the generator cover
while keeping the cam chain tight.
"
If the crankshaft is turned without drawing the cam
chain upward, the cam chain will catch between crank-
case and cam chain drive sprocket.
NOTE:
Just before installing the camshaft into the cylinder head, apply
molybdenum oil solution to the camshaft journals and cam
faces. Also, apply engine oil to the camshaft journal holders.
' MOLYBDENUM OIL SOLUTION
Final 23 N·m (2.3 kgf-m)
ENGINE 3-61
IN.
EX.